Table of Contents
Advertisement
The System Setup Level 1 screen can be used to set the UPS date and time, the
serial ports, change the Level 1 password, and logout of Level 1. In addition, the
Level 0 functions are available. The Level 1 screen will timeout after 60 minutes, or
can be logged out at any time by selecting the LOG OUT pushbutton from the
menu screen. Figure 9---20 shows the System Setup Level 1 menu screen.
Use the
the function using the SELECT pushbutton.
9--14
or
pushbuttons to highlight the setup function desired, then choose
SYSTEM SETUP --- LEVEL 1
CHANGE PASSWORD
ENTER PASSWORD
LOG OUT
ENTER PASSWORD
CONTRAST
VERSIONS
Figure 9 ---20. Setup Menu Level 1 Screen
SELECT
Powerware BPIV (10 kVA- -30 kVA) Installation and Operation
164201406 Rev. C 013004
Advertisement
Table of Contents
