Setup Menu Level 1 Screens - Powerware BPIV Installation & Operation Manual

9.3.6

Setup Menu Level 1 Screens

A password is required to access the Level 1 functions. To enter the password,
select ENTER PASSWORD from the System Setup Level 0 menu to display the
Enter Password screen. Figure 9---19 shows the Enter Password screen.
Use the or
or pushbuttons to change the password character. Once the password is
entered, select the ENTER pushbutton. The System Setup Level 1 menu screen is
displayed. The default password is L1.
IF NO PASSWORD THEN PRESS ENTER
Powerware BPIV (10 kVA- -30 kVA) Installation and Operation
164201406 Rev. C 013004
pushbuttons to select the password character position. Use the
ENTER PASSWORD
L1
Figure 9 ---19. Enter Password Screen
ENTER
9--13