Abnormal Flame Pattern - Rinnai Symmetry RDV3611 Operation Manual

Abnormal flame pattern

Each Rinnai Flame Fire has a distinct flame pattern. This should look the same every time you
start your fire, after an initial warm up period of approximately 20 minutes.
Abnormal flame performance and/
or pattern can indicate a problem
with your fire, such as blocked gas
injectors, or that the log set (burn
media) has shifted from when the
fire was first installed. There are
some warning signs that could
indicate a problem.
- Unusual smell from the
appliance
- Continued difficulty or delay in
establishing a flame
- Flame appears either very
short or very long
- Flame only burns part way
across the burner
- Severe soot building up on the
inside of the glass door
If any of the above signs occur,
please call Rinnai to discuss.
16 | RDV3611 Operation Manual: 11158-A 01-12
Normal flame pattern
Abnormal flame pattern