Abbreviated Dialling - TIPTEL Ergophone C User Manual

Making telephone calls
The automatic redialling process is stopped automatically if the target sub-
scriber has not answered the call after 10 dialling attempts.
Remarks:
• The automatic redialling is also activated if you press the P key and the
redial key while the handset is on-hook. If the called party answers the
call, you can hear him/her via the loudspeaker. Pick-up the handset or
press the loudspeaker key to hold the conversation.
• Your telephone comes with the following factory pre-set: The target sub-
scriber's telephone will ring for one minute after activation of the automatic
redial process. Afterwards, there will be a pause for one minute. After the
pause, the target subscriber's telephone will ring for one minute again.
This process is repeated up to 10 times (on the condition that nobody
answers your call). These settings can be adjusted individually. For refer-
ence, see the programming instructions as of page 39.

Abbreviated dialling

You have the option to store up to 10 frequently used telephone numbers
and thus abbreviate the dialling process. The telephone numbers to be
stored may have 20 digits as a maximum. They are stored under call number
memory stations 0 - 9 (numeric key pad).
0-9
Pick-up the handset.
Press the corresponding numeric key (0-9) for minimum
3 seconds. The telephone number appears in the display
and is dialled automatically.
Hold conversation as soon as the called party answers the
call.
18