Table of Contents
Advertisement
Making telephone calls
Remarks:
• After having pressed the R key, the telephone number is displayed for 40
seconds.
• The feature „transmission of the caller's telephone number" is also known
as „CLIP" (Connected Line Identification Presentation).
Ringing signal volume
Handset volume
The telephone can be set for „Handset volume normal loud" or „Handset
volume very loud" (See programming instructions on page 22). As a sign of
the setting „Handset volume very loud" activated, the handset symbol
appears in the display.
With the right slide switch, different volume in the programmed volume range
can be adjusted.
Press the P key.
Press the R key.
Name respective telephone number appears in the display.
If the name appears, you can toggle with the R-button
between name and telephone number.
Pick-up the handset. The telephone number is dialled
automatically.
The ringing signal volume can be adjusted by the left slide
switch.
Slide the right slider to the left: the volume is reduced.
Slide the right slider to the right: the volume is raised.
20
Advertisement
Table of Contents
