Manual Interruption Of An Emergency Call - TIPTEL Ergophone C User Manual

Making telephone calls
• The pause between the individual emergency dialling sequences can be
up to 9 minutes. During the pause - after completion of one emergency
call dialling sequence - the red LED blinks. During an emergency call
dialling sequence the LED is lit constantly.
• An emergency number can be called for a duration of 1 - 99 sec..
• If there are incoming calls while an emergency call is made, these incom-
ing calls are not answered as the emergency call always has priority.
Existing calls are automatically disconnected as soon as an emergency
call is initiated.
• When an emergency call service is called, the recipient of the emergency
call can use an identification code to get immediate information on the
person seeking help.
• You can record an individual emergency announcement. The person
receiving your emergency call will then hear this announcement as soon
as the call is answered.
• If the emergency call is picked up an answering machine, then it does not
stop but automatically dials the next number. The emergency call only
stops when it has been received and acknowledged (by inputting the
number key 5).
• At the end of the first run of emergency calls, a three-time signal tone
indicates that no further run is to follow.

Manual interruption of an emergency call

The programmed emergency calls are made after pressing the SOS key
(see last paragraph). Should you press the SOS key mistakenly, you can
stop the emergency call procedure by the following key sequence.
#
Press the P-key and the rhombus key sequentially.
The emergency call is interrupted.
14