Removing The Cpu; Figure 6 Cpu Alignment In Micro-Fcpga Socket (Socket P); Figure 7 Secure The Processor In The Socket - Quanmax KEEX-4030 User Manual

3. Align the gold triangle on the CPU with the similar marking on the socket (see
Figure below). If the processor does not drop completely into the socket, turn the
socket actuator to the open position until the processor drops completely in.
Note: You should not have to press down on the processor. If the processor does not
drop completely into the socket, turn the actuator until the processor drops completely in.

Figure 6 CPU alignment in Micro-FCPGA Socket (Socket P)

4. While gently holding the processor down with your finger, secure the processor
in the socket with a screwdriver by turning the socket actuator to the closed
position:

Removing the CPU:

To remove the CPU, reverse the installation steps.
1. Before removing the CPU, turn off the system power and wait for about 20
minutes until the heat radiation plate of the cooling fan and the CPU cools
KEEX-4030 User's Manual

Figure 7 Secure the processor in the socket

31
Chapter 3