Table of Contents
Advertisement
System Installation
Processor Installation
Processor Handling
Carefully follow the steps below in order to prepare the CPU for installation:
1.
Remove processor from packaging.
2.
Handle the CPU by grasping the substrate edges only with thumb and
forefinger.
DO NOT TOUCH PROCESSOR CONTACTS TO PREVENT
DAMAGING THE CPU.
Installing the CPU
Carefully follow the steps below in order to install the CPU:
1.
Check and confirm that you are installing the correct CPU type.
2.
Using a screwdriver, disengage (open) the socket actuator, as shown in figure
below.
KEEX-4030 User's Manual
Chapter 3
CAUTION
Figure 5 Disengage the socket actuator
30
Chapter 3
Advertisement
Table of Contents
