Proxim ORiNOCO AP-700 User Giude page 166

Command Line Interface (CLI)
Other Network Settings
Set Load Balancing Maximum Number of Clients
[Device-Name]>set wif <index> lbmaxclients <1–63>
Set the Multicast Rate (802.11a)
[Device-Name]>set wif 3 multrate <6, 12, 24
Set the Multicast Rate (802.11b/g)
[Device-Name]>set wif 3 multrate <1, 2, 5.5, 11
Enable/Disable Super Mode (802.11a/g only)
[Device-Name]>set wif 3 supermode <enable/disable>
Enable/Disable Turbo Mode (802.11a/g only)
[Device-Name]>set wif 3 turbo <enable/disable>
NOTE: Super mode must be enabled on the interface before Turbo mode can be enabled.
Configure Antenna Diversity
[Device-Name]>set wif 3 atdiversity <1, 2, 5(auto)> (see below)
[Device-Name]>reboot
Value Corresponding Antenna Enabled
1 802.11a/b/g (connector 1)
2 802.11a/b/g (connector 2)
5 (auto) Both antennas
NOTE: See Antennas
Set the Distance Between APs
[Device-Name]>set wif <index> distaps <1–5> (see below)
[Device-Name]>reboot 0
for more information on internal and external antenna ports.
>
(Mbits/sec)
>
(Mbits/sec)
AP-700 User Guide
166