Proxim ORiNOCO AP-700 User Giude page 115

Advanced Configuration
SSID/VLAN/Security
NOTE: Enabling Broadcast SSID will lower the total throughput of the AP by 2-4%.
NOTE: Enabling Broadcast SSID simultaneously with Rogue Scan will cause a drift in the beacon interval and the
occasional missing of beacons.
14.Set the 802.1p Priority given to packets tagged with this VLAN ID. Enter a number between 0-7.
15.If editing an entry, enable or disable the parameters on this page by electing Enable or Disable from the Status
drop-down menu. If adding a new entry, this drop-down menu will not appear.
16.Click OK to return to Wireless Security Configuration Screen.
17.Reboot the AP.
Configuring SSID/VLANs with VLAN Tagging Enabled
With VLAN Tagging enabled (from the SSID/VLAN/Security > Mgmt VLAN tab), multiple SSID/VLANs are supported.
Parameters set on the Wireless tab can be enabled per SSID by choosing the Enable Security per SSID option.
1. Click SSID/VLAN/Security > Wireless.
2. Select the Enable Security Per SSID option. The screen will update to the following:
Figure 4-44 SSID/VLAN Configuration (VLAN Tagging Enabled)
NOTE: If you disable (uncheck) the Enable Security per SSID option, you will be able to add multiple SSID/VLANs,
but the same configuration parameters (described below) will applied to all of them.
3. Click Add to configure additional SSIDs, VLANs, and their associated security profiles and RADIUS server profiles, or
click Edit to modify existing SSIDs.
The Add Entries or Edit Entries screen appears. See Figure 4-45.
AP-700 User Guide
115