Proxim ORiNOCO AP-700 User Giude page 112

Advanced Configuration
SSID/VLAN/Security
the same system separated per VLAN. See the
unique VLAN. In order for the AP to support multiple SSID/VLANs, VLAN Tagging must be enabled. These parameters
are configurable on the Wireless screen.
Configuring an SSID/VLAN with VLAN Tagging Disabled
With VLAN tagging disabled (from the SSID/VLAN/Security > Mgmt VLAN tab), only one SSID can be configured. All
parameters set on the Wireless tab will be applied to that SSID.
1. Click SSID/VLAN/Security > Wireless.
The SSID, VLAN, and Security Configuration page is displayed.
Figure 4-42 SSID, VLAN, and Security Configuration (VLAN Tagging Disabled)
2. Enable or disable RADIUS accounting on the VLAN/SSID by selecting Enable or Disable from the Accounting
Status drop-down menu.
3. Control the functionality of RADIUS MAC Authentication on the VLAN/SSID by selecting one of the following from the
the RADIUS Authentication Status drop-down menu.
• Enable: MAC addresses in the MAC Access Control List stored on the RADIUS server are blocked or allowed,
based on the MAC ACL settings. If a higher priority authentication protocol is also enabled, the higher-priority
settings will override the MAC ACL settings. See
• Disable: RADIUS MAC ACL settings are disabled.
Security Profile section for more information. Each SSID can support a
Authentication Protocol
AP-700 User Guide
Hierarchy.
112