Advanced Configuration
Alarms
Syslog Message Name
Client Login Authentication
Status
Client De-Authentication Status
RADIUS Accounting Start and
Stop Messages
CLI Configuration File Start
Execution
CLI Configuration File End
Execution
Priority
Severity
6
Informational
6
Informational
6
Informational
6
Informational
6
Informational
Description
Client logs in/authenticates. Message includes:
•
Client MAC Address
•
Authentication Type = None, ACL, RADIUS
MAC, 802.1X
•
Cipher Type = None, WEP, TKIP, AES
•
Status = Allow, Deny
•
SSID to which client is connecting
Sample Message:
<client mac address> | Status = <value> | SSID =
<value> | Auth Type = <value> | Cipher Type =
<value>
Client de-authenticates. Message includes:
•
Client MAC Address
•
Cipher Type = None, WEP, TKIP, AES
•
Status = De-authentication reason, which can
be any of the following:
–
Unknown reason
–
Stale authentication information
–
Authenticated STA leaving BSS
–
Inactivity
–
Association error
–
Class 2 frame received from
non-authenticated STA
–
Class 3 frame received from
non-associated STA
–
Associated STA leaving BSS
–
STA requesting information, but not yet
authenticated
–
Enhanced security (RSN) required
–
Enhanced security (RSN) used
inconsistently
–
Invalid Information Element
–
MIC Failure
–
WPA module de-auth
•
SSID to which client was connected
Sample Message:
<client mac address> | Status = <value> | SSID =
<value> | Cipher Type = <value>
Start and Stop accounting messages for wireless
clients.
CLI configuration file execution starts.
CLI configuration file execution ends.
AP-700 User Guide
80