Proxim ORiNOCO AP-700 User Giude page 18

Installation and Initialization
Prerequisites
SNMPv3 Authentication
Password
SNMPv3 Privacy Password
Security Settings
Authentication Method
Authentication Server Shared
Secret
Authentication Server
Authentication Port
Client IP Address Pool
Allocation Scheme
DNS Server IP Address
Gateway IP Address and
Subnet Mask
If Secure Management is enabled, each Access Point requires a password for sending
authenticated SNMPv3 messages. The default password is public. The default
SNMPv3 username is administrator, with SHA authentication, and DES privacy
protocol.
If Secure Management is enabled, each Access Point requires a password when
sending encrypted SNMPv3 data. The default password is public.
You need to determine what security features you will enable on the Access Point.
A primary authentication server may be configured; a backup authentication server is
optional. The network administrator typically provides this information.
This is a password shared between the Access Point and the RADIUS authentication
server (so both passwords must be the same), and is typically provided by the network
administrator.
This is a port number (default is 1812) and is typically provided by the network
administrator.
The Access Point can automatically provide IP addresses to clients as they sign on.
The network administrator typically provides the IP Pool range.
The network administrator typically provides this IP Address.
The gateway IP address and subnet mask of the network environment where the
Access Point is deployed.
AP-700 User Guide
18