NEC Express5800/B120a User Manual page 100

4-50 Configuring Your Server
Controller Selection:
Controller Properties:
Scan Devices:
Virtual Drives:
Drives:
Configuration Wizard:
Physical View /
Logical View:
Events:
Exit:
Status Indication of Virtual Drive (not shown on Physical View)
Optimal:
Degraded:
Offline:
Initialization:
ConsistencyCheck:
Rebuild:
Reconstruction:
Reconstruction:
Unconfigured Good:
Online:
Offline:
Unconfigured Bad:
Rebuild
Hotspare
WebBIOS Menu
Goes back to Adapter Selection menu.
Displays properties of the controller.
Detects hard disk drives connected with the controller again.
Opens operation window for VD that has already been
configured.
Opens operation window for hard disk drive connected with the
controller.
Displays the wizard to configure VD.
Switches indication between hard disk drives and VD
configuration.
Displays event data.
Goes to Exit menu of WebBIOS.
Indicates that the VD is in normal state.
The indication is green.
Indicates that one of the hard disk drives in the relevant VD is
degraded.
The indication is blue.
The relevant VD is in offline state.
The indication is red.
The relevant VD is being initialized.
Consistency Check is being performed to the relevant VD.
The relevant VD is being rebuilt.
The relevant VD is being reconstructed.
Status Indication of Hard disk drive
The relevant VD is being reconstructed.
The hard disk drive connected with the controller is not in use.
The indication is blue.
Indicates that the hard disk drive in configuration is in normal state.
The indication is green.
Indicates that the hard disk drive in configuration is in offline state.
The indication is red.
The relevant hard disk drive is faulty.
(The hard disk drive in this status can be checked only on Physical
View.)
The indication is black.
The relevant hard disk drive is being rebuilt.
The indication is yellow.
Indicates the hard disk drive that is assigned to hot-spare.
The indication is pink.