Operation Of Various Features - NEC Express5800/B120a User Manual

4-72 Configuring Your Server

Operation of Various Features

Check Consistency
Check Consistency is used to check consistency among virtual drives.
1.
Start WebBIOS.
2.
Click [Virtual Drives] on WebBIOS Top Menu.
3.
Select a VD to perform Check Consistency from the upper right frame of Virtual Drives
screen.
4.
Click the checkmark column for Check Consistency from the lower right frame of Virtual
Drives screen.
5.
Make sure that Check Consistency is checked, and click [Go].
6.
Inconsistency may be detected at the first Check Consistency performed after the VD was
configured. If the following alert is displayed, click [Yes] to perform Check Consistency.
A lot of inconsistency may be detected, however, it is not a failure.