Locate - NEC Express5800/B120a User Manual

Locate

The Locate command makes an LED on hard disk drive light or blink to confirm the location of the
slot. We recommend you to check the slot of hard disk drive before adding VD or hot spare disks,
reconstructing VD, or replacing hard disk drive.
How to execute Locate command on WebBIOS
1.
Click a Physical Drive to check the location on the WebBIOS Top Menu.
2.
The Physical Drive properties are displayed. Click [Locate].
3.
Click [Go]. The LED of the hard disk drive lights or blinks.
Configuring Your Server 4-81