Standard Features - NEC Express5800/B120a User Manual

STANDARD FEATURES

High performance
High-speed Intel
DDR3-1066 Registered DIMM or DDR3-
1333 Unbuffered DIMM
High-speed 1000BASE-T interface x2
(1Gbps supported)
High-speed disk access (SAS and SATA)
Management Utilities
NEC ESMPRO
Remote monitoring feature
(EXPRESSSCOPE engine 2)
Maintenance Features
Off-line Maintenance Utility
Memory dump feature using the DUMP
switch
Xeon Processor
® ®
General Description 2-3
Expandability
Two mezzanine card slots
Large memory of up to 64GB
Up to two multi-processors are available
for upgrade.
Two network ports
Up to two SAS or SATA hard disk drives
(2.5-inch) per CPU blade
Two USB (Ver 2.0) interface ports
High-reliability
Memory monitoring feature (correction of
correctable error/detection of
uncorrectable error)
Bus parity error detection
Temperature detection
Error notification
Internal voltage monitoring feature
BIOS password feature
Auto-rebuild feature (hot-swappable)
Many Available Features
Software power-off
Remote power-on feature
AC-Link feature
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D)
Easy and Fine Setup
NEC EXPRESSBUILDER (system
management tools)
SETUP (BIOS setup utility)
LSI Software RAID Configuration Utility
(RAID configuration utility)