NEC Express5800/B120a User Manual page 109

Locate:
Make Global HSP:
Make Dedicated HSP:
Remove HOTSPARE:
Make Unconf Bad:
Make Unconf Good
Prepare Removal:
Undo Removal:
Make Drive Offline:
Make Drive Online:
Rebuild Drive:
Mark as Missing:
IMPORTANT:
Physical Drive Properties
Let Disk Status lamp light or blinks.
The selected hard disk drive is assigned as hot-spare available for all
DGs.
The selected hard disk drive is assigned as hot-spare available only for
the specific DG.
The selected hard disk drive is unassigned from hot-spare and made
Unconfigured Good state.
Make the selected hard disk drive in faulty state. This is indicated on the
hard disk drive of which status is "Unconfigured Good".
Make the selected hard disk drive in "Unconfigured Good" state. This is
indicated on the hard disk drive of which status is "Unconfigured Bad".
Make the power status of the selected hard disk drive in "Powersave"
state.
This is indicated on the hard disk drive of which power status is "On" and
the status is "Unconfigured Good".
Make the power status of the selected hard disk drive in "On".
This is indicated on the hard disk drive of which power status is
"Powersave".
Make the selected hard disk drive in "Offline" state.
This is indicated on the hard disk drive of which status is "Online".
Make the selected hard disk drive in "Online" state.
This is indicated on the hard disk drive of which status is "Offline".
Start rebuilding VD that contains the selected hard disk drive.
This is indicated for the hard disk drive of which status is "Offline".
Remove the VD that contains the selected hard disk drive from the DG.
This is indicated on the hard disk drive of which status is "Offline".
The RAID Controller does not support Events feature.
Configuring Your Server 4-59