NEC Express5800/B120a User Manual page 148

5-12 Installing the Operating System with Express Setup
NOTES:
You can use only the physical devices that have same model
number to configure logical drive.
If the process is not finished normally, the driver may not be stored
in the EXPRESSBUILDER. Refer to "Optional Board Supported
by NEC EXPRESSBUILDER" described earlier in this chapter.
When you use N8403-026 (RAID Controller), N8403-027 (SATA
Interface card), if [Skip the logical drive creation] is not selected at
[Enter RAID settings] screen, refer to "RAID Configuration
(Chapter 4)" or "Creating new RAID using N8403-026 (RAID
Controller), N8403-027 (SATA Interface card) (Page 5-54)" to
create RAID beforehand.
9.
Specify the installing medium and the Windows system partition.
[Specify medium / Partition] steps are displayed. Confirm the parameters, modify if
necessary, and then click [Next].