Table of Contents
Advertisement
Installation and Removal
Install or remove an interface card for connecting hard disk drive in the following procedure.
1.
After the shutdown processing for the CPU blade to be removed, turn off the power of the
CPU blade.
2.
Take out the CPU blade from the Blade Enclosure.
Refer to the User's Guide of the Blade Enclosure.
3.
Place the CPU blade on anti-static sheet with little dust.
4.
Remove the hard disk drive.
5.
Remove the two screws fixing the top cover.
6.
Firmly hold the cover, move it slightly toward the rear of the blade, then lift the cover to
remove it from the CPU blade.
IMPORTANT:
with any electronic devices on the CPU blade.
Handle the cover carefully so as not to make it contact
Upgrading Your Server 9-27
Advertisement
Table of Contents
Troubleshooting
