Answering Calls; Call Waiting (Answering A Call When On You Are On Another Call); Putting An Existing Call On Hold - Polycom SoundPoint IP 650 User Manual

Hosted ip-pbx phone system

Hide thumbs Also See for SoundPoint IP 650:

Table of Contents

Answering Calls

When you are not in another call, you can answer a call in these ways:

Use the handset.

Use the speakerphone.

Use the headset.

3.1

Call Waiting (Answering a call when on

you are on another call)

(Must have this feature enabled with your phone service)

If you have an active call, and an incoming call arrives on the same line,

you may hear a call waiting tone (stutter tone). You will see the second incoming

caller's information appear on the graphic display.

Press the "Hold" soft key to put the original call on hold.

Press the "Answer" soft key to answer the new call.

Note: The original call is placed on hold at this time. After the call has ended -press

"Resume" soft key or "Hold" soft key again to continue with the original call.

3.2

You can put a call on hold by pressing the Hold key. You may now replace the

handset without cutting the caller off. You can also now make another call while the

first call is on hold.

To retrieve the call, press Hold key again or the Resume soft key to retrieve the call.

The registered line icon appears as the line indicator.

Pick up the

handset.

Press the "speaker phone" icon button.

Press the "headset icon" button.

Table of Contents

450