Polycom SoundPoint IP 650 User Manual page 54

1. Add the first phone number to ring by entering a number in the Phone Number
Field
2. Enter the start ring time and end ring time for the phone (one ring cycle is 6
seconds, however for mobile phones, you may have to allow more time depending
on the mobile networks post dial delay)
3. Click the "Add" button.
4. Continue to add numbers as defined in steps 1-3 until all numbers have been
added.
5. Select the preferred ringtone for your desk phone.
6. Select the number to transfer calls to in the event the lines are all busy or not
answered. Options are voicemail or any Dialable number.
7. Click Finish
54