Epson Stylus Photo 720 Service Manual page 79

EPSON Stylus Photo 720 / EPSON Stylus Photo EX3
8. Remove 3 Hexagon Nuts and shift the PF Motor Assembly to the front side of the
printer to remove it. (Refer to Figure 4-18.)
PF Motor Pinion Gear
Figure 4-18. 3 Hexagon Nuts Securing the PF Motor
When removing the PF Motor Assembly, first slightly pull out
n
C H E C K
the PF Motor Assembly from the frame and slide the Motor
P O I N T
Shaft to a larger cutoff of the frame and remove it.
Be careful for the routing direction of the cable from the PF
n
Motor Assembly. (Refer to Figure 4-19.)
Disassembly and Assembly
3 Hexagon Nuts Securing
the PF Motor
Disassembly
PF Motor
(Behind the Frame)
C a b l e D i r e c t i o n
Small Hole
Figure 4-19. PF Motor Assembly Installation
Revision A
PF Motor Pinion Shaft
Large Hole
79