Epson Stylus Photo 720 Service Manual page 83

EPSON Stylus Photo 720 / EPSON Stylus Photo EX3
5. Release the protrusion of the ASF Frame from the ASF Hopper Assembly installation
point at the upper left.
ASF Hopper Upper Left
Installation Hole
ASF Hopper Assembly
Figure 4-27. ASF Hopper Assembly Removal
Disassembly and Assembly
6. Align the right cam part of the ASF Hopper Assembly to the cutoff (rectangle) of the
ASF Frame assembly. Lift the left side of the ASF Hopper Assembly and carefully
remove the ASF Hopper Assembly.
ASF Frame
C A U T I O N
7. Carefully remove the Compression Spring 1.961. (Refer to Figure 4-34) from both
sides between the ASF Hopper Assembly and the R/L ASF LD Roller Assembly.
8. Shift the ASF LD Roller Shaft to the left and remove the LD Roller Shaft from the
ASF LD Roller Shaft hole of the right side of the ASF Frame.
9. Remove the LD Roller Assembly from the LD Roller Shaft.
Disassembly
ASF Frame Assembly Cutoff
Figure 4-28. ASF Hopper Assembly Cam Part Aligning Point
When removing ASF Hopper Assembly from the ASF Frame
Assembly, be careful not to damage the Compression Spring 1.961 of
the LD Roller Assembly and transparent plastic film. Refer to Figure
4-34.
Revision A
Right Hopper Cam Part
83