Control Panel Removal - Epson Stylus Photo 720 Service Manual

EPSON Stylus Photo 720 / EPSON Stylus Photo EX3

4.2.3 Control Panel Removal

1. Remove the Housing. (See"Housing Removal" on page 68)
2. Remove 2 screws securing the Control Panel, then remove the Control Panel from the
Printer Mechanism.
3. Remove the screw securing the Left Housing Panel to the Printer Mechanism. (Stylus
Photo EX3: remove 2 screws.)
4. Remove 2 screws securing the Panel Board Assembly to the Printer Mechanism, then
remove C209PNL Board from the Panel Assembly. (Stylus Photo EX3: C366PNL)
5. Remove FFC from the connector on the C209PNL Board.
(Stylus Photo EX3: C366PNL)
NOTE: The panel board of Stylus Photo EX3 is C366PNL.
C H E C K
By removing the Control Panel, the Stacker Assembly can be also
P O I N T
detached from the Printer Mechanism, since it is held by the Control
Panel Assembly.
Disassembly and Assembly
Panel Board Assy Securing Screw
Left Housing Panel
H o u s i n g , P a n e l , L e f t
Figure 4-5. Control Panel Removal
Disassembly
S h i e l d P l a t e , P a n e l
Panel Shield Plate
Stacker Assembly S t a c k e r , A s s e m b l y
Left Housing Panel Securing Screw
Revision A
Panel Board
B o a r d A s s e m b l y , P a n e l
Assembly
Panel Assembly
P a n e l A s s e m b l y
Panel Assembly
Securing Screw
71