Epson Stylus Photo 720 Service Manual page 70

EPSON Stylus Photo 720 / EPSON Stylus Photo EX3
A D J U S T M E N T
After replacing C301MAIN Board, perform the following
R E Q U I R E D
adjustments.
Head ID Input (See "Head Voltage ID Input" on page 101)
n
Bi-D Adjustment (See "Bi-Directional Adjustment" on
n
page 106)
USB ID Input (See "USB ID Check/Input" on page 109)
n
C H E C K
When the MAIN Board is replaced, the value of Ink Cartridge
P O I N T
Consumption Counter and the Waste Pad Counter is reset.
So, replace the following parts as well.
(Refer to "Special Settings Mode" on page 20 and "Protection Counter
Check/Clear" on page 111.)
Ink Cartridge
n
Waste Ink Pad
n
Disassembly and Assembly Disassembly
Revision A
70