Epson Stylus Photo 720 Service Manual page 76

EPSON Stylus Photo 720 / EPSON Stylus Photo EX3
Since the spring is included among the gears in the Pump
n
C H E C K
Assembly, be careful that the parts do not pop out during
P O I N T
disassembly and assembly. (Refer to the Figure 4-11 below.)
When assembling, be careful not to crush nor leave any stress
n
on the ink tube connecting the Pump Assembly and the Cap
Assembly. (Refer to the Figure 4-12.)
After installing the Pump Assembly, rotate the Combination
Gear, 12.4, 28 and check if the Head Cleaner moves back and
forth. (Perform this check while holding the Cap Assembly to
the right of the frame.)
H e a d C l e a n e r
Figure 4-11. Components of Pump Assembly
Disassembly and Assembly
P u m p C o m p o n e n t s
A s s e m b l y O r d e r
Disassembly
I n k T u b e R o u t i n g F r o m
C a p A s s e m b l y
O K
( I n k t u b e g o e s b e h i n d o f
t h e c a p a s s e m b l y )
Figure 4-12. Ink Tube Routing
Revision A
V i e w e d f r o m f r o n t
N G
( T h e i n k t u b e i s o n t h e p a r t o f
t h e c a p a s s e m b l y )
76