EPSON Stylus Photo 720 / EPSON Stylus Photo EX3
5.3.3 Adjustment Program Initial Setting Screen
Before entering the main menu, you have to do the following.
Select the model name.
o
Select the market destination.
o
Follow the procedure below to do initial settings.
1.
When you execute the program, the following screen appears. Select the appropriate
model in the screen below. If you select the wrong model name, the program will not
operate.
Figure 5-4. Model Name Selection
To check the version of the program, click "Version". The following screen appears to
provide you with version information.
NOTE: This printer stores its model name in the PROM. Therefore, even you
select the model name in the screen above, model name will NOT stored
in the EEPROM. Selecting model name in the screen above determines
special commands which differs between two models.
Adjustment
Figure 5-5. Adjustment Program Version Information
2.
Click "OK" in the screen in Figure 5-4. When the screen below appears, select
"World" and click "OK". Destination setting data will be stored in the specified
address of EEPROM.
Adjustment by Adjustment Program
Figure 5-6. Destination Setting
Revision A
99