Epson Stylus Photo 720 Service Manual page 92

EPSON Stylus Photo 720 / EPSON Stylus Photo EX3
7. Release hooks securing the Left Bushing 12 to the Left Frame and rotate the Left
Bushing 12 to the front side of the printer. Align the protrusion of the Left Bushing 12
and the cutoffs of the frame. Shift the bushing with PF roller to the left and remove the
PF roller.
Figure 4-47. Left Bushing 12 and PF Roller Removal
When reinstalling the Right Upper Paper Guide, let the head of
n
C H E C K
the PE Sensor Lever go through the cutoff of the Right Upper
P O I N T
Paper Guide from the front side of the printer.
Be careful not to damage the hook, when removing or installing
n
the Front Paper Guide.
Be careful not to damage the gray coated part of PF Roller
n
Assembly during disassembly and assembly.
Be careful not to damage any gears. Especially be careful at
n
handling the Spur Gear 73.6 installed at the left side of the PF
Roller Assembly because it is a precision gear.
Disassembly and Assembly
Left Bushing 12
Shift this toward the left.
Right Upper Paper Guide
Figure 4-48. Right Upper Paper Guide Installation
Disassembly
Front Side of the Printer
Revision A
92