Overview; Cleaning - Epson Stylus Photo 720 Service Manual

EPSON Stylus Photo 720 / EPSON Stylus Photo EX3

6.1 Overview

This section provides information to maintain the printer in its optimum condition.

6.1.1 Cleaning

This printer has no mechanical components which require regular cleaning except the
printhead. Therefore, when returning the printer to the user, check the following parts
and perform appropriate cleaning if stain is noticeable.
Never use chemical solvents, such as thinner, benzine, and acetone
n
C A U T I O N
to clean the exterior parts of printer like the housing. These
chemicals may deform or deteriorate the components of the
printer.
Be careful not to damage any components when you clean inside
n
the printer.
Do not scratch the surface (coated part) of PF roller assembly. Use
n
soft brush to wipe off any dusts. Use a soft cloth moistened with
alcohol to remove the ink stain.
Do not use cleaning sheet included in the media for normal usage.
n
It may damage the coated surface of PF roller.
Exterior parts
o
Use a clean soft cloth moistened with water and wipe off any dirt. If the exterior
parts are stained with ink, use a cloth moistened with neutral detergent to wipe it
off.
Inside the printer
o
Use a vacuum cleaner to remove any paper dust.
ASF LD Roller
o
If paper dust on the surface of ASF LD Roller lowers the friction, set the adhesive
surface of the cleaning sheet included in the media to the surface of the ASF roller
and repeat loading paper from the ASF.
Maintenance Overview
Revision A
115