Record Timer; Storage; Memory - Avtech MEGAPIXEL WIRELESS NETWORK CAMERA SERIES Operation Manual

3.4.2 Record Timer

To schedule alarm recording or human detection recording, click "External Alarm" or "Internal Alarm" (human
detection) to enable the recording, and select the day and time for recording.
Note: The timer must be enabled for the record function to work properly.

3.5 Storage

3.5.1 Memory

In "Memory", you can check the remaining capacity for recording, or clear all recorded data saved if needed.
Note: The recorded data will be removed also for Model 2 when you reset or reboot this camera.
This camera can only save up to three alarm recordings. To save more recorded data, it's recommended to use
this camera with the compatible NVR.
Note: It's available for Model 1 to insert a compatible micro SD card to extend video storage.
To know how and where to insert a micro SD card, please refer to "1.7 Micro SD Card" at page 3.
To know the compatible list of micro SD cards, please refer to "APPENDIX 3 MICRO SD CARD
COMPATIBLE LIST" at page 26.
Note: To know the total recording time per recording resolution, please refer to "APPENDIX 5
RECORDING TIME TABLE" at page 28.
16