Record Timer; Storage; Memory; Trigger - Avtech IC-AVM2421 Operation Manual

3.5.2 Record Timer

To schedule alarm and motion recording, enable it, and select the day and time for recording.
Note: The timer must be enabled for the record function to work properly.
Note: The selected time will be yellow-colored.

3.6 Storage

3.6.1 Memory

In "Memory", you can check the remaining capacity for recording, or clear all recorded data saved if needed.
Note: The recorded data will be removed also when you reset or reboot this camera.
Note: To save more recorded data, it's recommended to use this camera with the compatible NVR.
Note: To know the total recording time per recording resolution, please refer to "APPENDIX 6
RECORDING TIME TABLE" at page 40.

3.7 Trigger

3.7.1 Trigger
You can configure how this camera reacts when there's an alarm or motion event.
22