General; Time - Avtech MEGAPIXEL WIRELESS NETWORK CAMERA SERIES Operation Manual

3.7 General

3.7.1 General
To change the language of UI interface, select from the drop-down list in "Language".
To allow the status LED indicators to show the status as indicated in "1.6 Status Indicator" at page 2, select "ON"
"Enable" in "Status LED Mode"; to hide the status, select "OFF"; to only show the error status, select "Temporary
Disable".
Note: The status LED mode will be restored to "Enable" after camera reboot when "Temporary OFF" is
selected.
To lock camera access when it's not used after the specified time, select "5 MIN", "15 MIN" or "30 MIN" from the
drop-down list of "Auto Lock Time", or select "NEVER" to disable this function.
Note: When the camera access is locked after the specified time, to resume camera access, please
enter the password.

3.7.2 Time

Set daylight saving time and the current time, and click "Save" to confirm.
Function
 Time Configuration
Date
Time
 Daylight Saving Time Configuration
Daylight Saving Time
Description
Set the current date.
Set the current time.
Specify whether to use daylight saving time (Enable / Disable).
If this function is enabled, set the time period (Start Time / End Time), and adjust the daylight
saving time in hours (Adjust Time).
19