Mail; Filter - Avtech MEGAPIXEL WIRELESS NETWORK CAMERA SERIES Operation Manual

3.2.7 MAIL

Enter the detailed e-mail information and click "Save" to confirm. The information you set here will be applied
when "Email" is selected in "Trigger" → "Trigger".
Function Description
SMTP Server Enter the SMTP server address provided from your e-mail system supplier.
Port Enter the port number provided from your e-mail system supplier. If this column is left blank, the e-mail server will use
port 25 to send e-mails.
Mail From Enter the name of the sender.
SSL Encryption Select "Yes" if your e-mail server is using SSL encryption to protect your e-mail content from unauthorized access.
Verify Password Some mail servers are required to verify the password. Please enter the "user name" and "password".
E-Mail Address List Add the e-mail address(s) of the assigned recipient(s).
Test When all information is entered, click "Test Mail" to try if the receipt.

3.2.8 Filter

Choose to permit or block the IP address(es) which can access this camera, and click "Save" to confirm.
Function Description
 Filter Configuration
Error Count Set the maximum count for login failure. When the maximum count is reached, the IP address trying to access the
network camera will be locked.
Error Lock Time Set the lock time in minutes when the maximum count of error login for an IP address is reached.
Echo Request Select "Non-Block" to allow other users to use the ping command to detect the IP address of your network camera, or
"Block" to deny the ping command request.
 IP/MAC Filter Configuration
IP/MAC Filter Choose to enable or disable the filter function.
IP/MAC Filter Policy If "Enable" is selected, choose whether you want to permit (Allow) or block (Deny) the IP address list below.
 IP/MAC Filter Rules
Rule To add an item to the IP address list, key in the IP address in "Rule", and click "Add".
‧
To remove an existing item in the IP address list, click the item you want to remove, and click "Delete".
‧
11