Color; Audio; Led - Avtech MEGAPIXEL WIRELESS NETWORK CAMERA SERIES Operation Manual

3.3.3 Color

Adjust the color performance from Brightness, Contract, Hue and Saturation. Click and drag the slider to preview
the color change on the right side of ths page and adjust the image color.
To restore the default values, click "Back to Default".

3.3.4 Audio

Drag the slider to adjust the volume of the microphone and speaker.

3.3.5 LED

To enable the LED light when the monitoring area is getting dark, select "Yes" in "Auto Enable".
To schedule the LED light to be on, select "Timer" to enable the schedule and set the day and time.
To specify the day and time to enable the LED light when an external alarm or a motion event occurs, select
"External Alarm" or "Motion" to enable this function, and set the day and time.
Note: For the LED light activation to work properly, please go to "Trigger"  "Trigger" to enable
external alarm detection or motion detection, and select the LED alert event. For details, please
refer to "3.6.1 Trigger" at page 17.
14