Account; Maintenance - Avtech MEGAPIXEL WIRELESS NETWORK CAMERA SERIES Operation Manual

3.7.5 Account

You can create a new account with different user access privilege, or delete or modify an existing account
setting.
How to create a new account
Step1: Click "New", and fill in the following columns.
Column
User Name
Password
Confirm Password
User Level
Life Time
Step2: Then, click "Save" to save your setting and create a new account.
How to modify or delete an existing account
Step1: Select the account you want to modify or delete.
Step2: To modify the account, click "Edit" to change the settings, and click "Save".
To remove the account, click "Delete".
Note: It's not allowed to remove an account when there's only one account in the account list.

3.7.6 Maintenance

Firmware Upgrade
This function is used when users need to upgrade the camera for function scalability.
Note: Before using this function, make sure you have the correct upgrade files provided by your
installer or distributor.
Note: The event videos saved in the camera will be removed after firmware upgrade. Make sure you've
copied important events to your PC before firmware upgrade.
Description
Set a user name that will be used for camera access. The user name allows up to 16 alphanumeric characters.
Set the password that will be used for remote login. The password allows up to 16 alphanumeric characters.
Enter the password again to confirm.
Set the security level of an account to give the permission to control different functions. There are four user levels:
SUPERVISOR, POWER USER, NORMAL USER and GUEST.
Select how long this account is allowed to stay online (1 MIN / 5 MIN / 10 MIN / 1 HOUR / 1 DAY / INFINITE)
21