Figure 3-49 Default Setup Screen - Honeywell HRSD8 User Manual

Configuration
Option Action
Mode Highlight the field under the Mode heading and press
mode that is used. Choose from: No Record, Time, Event, and Time & Event.
When the DVR is in the No Record mode, it does not record during the preset day
and time range as long as the PANIC button is not pressed. Use the No Record
mode when you do NOT want the DVR to record during certain times.
When the DVR is in the Time mode, the
the screen. The DVR records, and displays the
screen during the scheduled times.
When the DVR is in the Event mode, the red
of the screen. The DVR records and displays the
the screen when any event occurs.
When the DVR is in the Pre-Event recording mode, the yellow
when there is no event and the DVR is not recording.
When the DVR is in the Pre-Event mode, the red
occurs and the DVR starts recording.
When the DVR is in the Time & Event mode, the DVR follows the Time settings and
the
Channels Highlight the field under the Channels heading, and press
cameras record during that scheduled time.
Settings Highlight the field under the Settings heading, and press
recording settings. You can set the ips and Quality of the recording for any modes
you set up in the Mode column. If you do not set the ips and Quality in the Settings
column, the DVR follows the default settings. See
page
Highlight the field under the
settings. You are asked to confirm that you want to delete the settings.
Default... Highlight Default... and press
Setting Recording Defaults
1.
2.
Document 800-03650 Rev D
02/09
icon displays. The DVR follows the Event settings and the
77 for details.
Figure 3-49 Default Setup Screen
Highlight the fields under ips and press
Time and Event recording. You can select from a range of 0.10 to 30.0 images per
second.
Highlight the fields under Quality and press
for Time and Event recording. You can select from: Very High, High, Standard,
and Basic.
icon displays at the top-left corner of
icon at the top-left corner of the
icon displays at the top-left corner
and
Setting Recording Defaults
heading and press
. The Default Setup screen appears.
to set the images per second for
to set the recorded image quality
to change the recording
icon at the top-left corner of
icon displays
display when any event
icon displays.
to select which
to define the
to delete the recording
on
77