Softkey Function; Panel Description - Icom IC-M91D Instruction Manual

3

PANEL DESCRIPTION

■
Function Display (Continued)
!5 POSITION INDICATOR
➥
Shows the current position when valid GPS data is re-
ceived or the position is manually programmed.
• "??" will blink when invalid GPS data is received for 30
seconds.
• "??" will blink when manually input GPS data is no longer
valid after 4 hours, and then "NO POSITION" will appear
after 23.5 hours.
• "NO POSITION" is displayed when no GPS data is received
since the transceiver power turned ON.
• "NO POSITION" appears when no GPS data is received,
and no position is manually input.
!6 SCAN INDICATOR
➥
"SCAN 16" is displayed during a Priority scan; "SCAN"
appears during a Normal scan. (p.
➥
"DUAL 16" appears during Dualwatch; "TRI 16" appears
during Tri-watch.
!7 BATTERY INDICATOR
Shows the battery's remaining power.
Indication
Battery level Full
blinks when the battery is over charged.
9
17)
(p. 19)
Charging
Middle No battery
required
■

Softkey function

Various functions can be assigned to the softkeys.
When the key function is assigned, the key icon is displayed
above the softkeys, as shown below.
D
Softkey function selection
When "Ω" or "≈" is displayed beside the key icon, pushing [Ω]
or [≈] sequentially displays the previous or next key function
that is assigned to the softkey.
Push
*
*Push this key to start or stop a scan.
The order of the key icons may differ, depending on the
preprogramming.
Push