Dsc Settings - Icom IC-M91D Instruction Manual

New2001
■

DSC Settings

D Position Input
D Add Individual ID/Group ID
D Delete Individual ID/Group ID
D Automatic Acknowledgement
These items set the Automatic Acknowledgement function to
"Auto TX" or "Manual TX."
When an Individual, Position Request, Polling Request or
Test Call is received, the transceiver automatically transmits
an Individual Acknowledgement, Position Reply, Polling Re-
ply or Test Acknowledgement Call, respectively.
When "INDIVIDUAL ACK" is set to "Auto TX," the trans-
ceiver automatically transmits the Acknowledgment call
including "Unable to Comply" (No Reason Given) after re-
ceiving the Individual call.
q Enter either "INDIVIDUAL ACK," "POSITION ACK" or "TEST
ACK" in the DSC Settings menu.
➪
❮MENU❯
(Push [MENU])
➪
❮MENU❯ ❮DSC Settings❯
➪
❮MENU❯ ❮DSC Settings❯
(See page 23)
(See pages 20 and 21)
(See page 22)
➪
❮DSC Settings❯ ❮Individual ACK❯
(Push [Y]/[Z], then push [ENTER].)
➪
❮Position ACK❯
➪
❮Test ACK❯
w ] or [] to select "Auto TX" or "Manual TX," then
Push [
push [ENTER].
• Push [BACK] to cancel and return to the DSC Settings menu.
e
Push [EXIT] to return to the normal operating mode.
8
DSC OPERATION
(default: Manual)
(default: Auto TX)
(default: Auto TX)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
66