Softkey Function - Icom ic-m423 Instruction Manual

!6 POSITION INDICATOR
➥ Shows the current position when position data is re-
ceived, or the position is manually entered.
• When the GPS position is invalid, "??" may blink every 2 sec-
onds instead of position. The last position is held for only
23.5 hours, and after that, "NO POSITION" is displayed.
• "??" will blink every 2 seconds instead of position, after 4 hours
have passed from the time when the position is manually en-
tered. The manually entered position is held for only 23.5 hours,
and after that, "NO POSITION" is displayed.
➥ "NO POSITION" is displayed when no GPS receiver is
connected, and no position is manually input.
!7 SCAN INDICATOR
"SCAN 16" is displayed during a Priority scan; "SCAN"
➥
is displayed during a Normal scan. (p. 20)
"DUAL 16" is displayed during Dualwatch; "TRI 16" is
➥
displayed during Tri-watch. (p. 20)
!8 LOCAL ICON* (p. 14)
Displayed when the Attenuator function is turned ON.
*For only U.S.A. and Australian version transceivers.
PANEL DESCRIPTION

■ Softkey function

Various functions can be assigned to the softkeys. When a
key function is assigned, the key icon is displayed above the
softkey, as shown below.
D Softkey function selection
When "Ω" or "≈" is displayed beside the key icon, sequentially
pushing [Ω]/[≈] displays the previous or the next key function
that is assigned to the softkey.
Push
*
*Push this key to start
and stop scan.
The order of the key icons may differ, depending on the
presetting.
2
1
2
3
4
5
6
7
8
9
10
Push
11
12
13
14
15
16
7