Icom IC-M91D Instruction Manual page 50

New2001
8
DSC OPERATION
D
Transmitting a Test Acknowledgement call
When the "TEST ACK" in DSC settings is set to 'Auto TX'
(p. 66), the transceiver automatically transmits a reply call
when receiving a Test call.
Quick ACK:
q
When a Test call is received, beeps sound and the screen
shown below is displayed.
Push [ALARM OFF] to stop the beeps.
w
Push [ACK].
• Push [INFO] to display the Test call information.
Push [BACK] to return to the previous screen, or push [ACK].
43
e
The Test ACK confi rmation screen is displayed.
Push [CALL] to transmit the acknowledgement call.
r
While transmitting the acknowledgement call, the screen
shown below is displayed, and then returns to the normal
operating mode.
New