Icom IC-M91D Instruction Manual page 69

New2001
D Receiving a Test Call
When a Test Call is received:
➥ The alarm sounds for 2 minutes.
➥ "RCVD TEST CALL" pops up. The LCD backlight blinks for
2 minutes.
q
Push [ALARM OFF] to stop the alarm and the blinking
backlight.
• If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
w
Push a softkey to select your desired action.
DSC OPERATION
[IGN]
➥ Push to ignore the Call and return to the normal operat-
ing mode.
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.
[INFO]
➥ Push to display the Received call
[ACK]
➥ Push to display the "TEST ACK" screen to reply to the
Call. (p. 43)
When "TEST ACK" is set to "Auto TX," the transceiver au-
tomatically replies to the Call. In that case, both the TX and
RX calls are stored in the Transmitted and Received Call
Logs.
8
1
2
3
4
5
6
information. (p. 63)
7
8
9
10
11
12
13
14
15
16
62