Icom IC-M91D Instruction Manual page 60

New2001
8
DSC OPERATION
D
Receiving a Distress Relay Call
When a Distress Relay call is received:
➥ The emergency alarm sounds for 2 minutes.
➥ "RCVD DISTRESS RELAY" pops up and the LCD back-
light blinks.
q
Push [ALARM OFF] to stop the alarm and the blinking
backlight.
w
Push a softkey to select your desired action.
[IGN]
➥ Push to return to the normal operating mode.
• The transceiver exits the DSC mode.
• By pushing [PTT], the transceiver also exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.
53
[INFO]
➥ Push to display the Received call information.
[ACPT]
➥
Push to accept the call.
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
• If you haven't pushed [CH 16] within 10 seconds, the operat-
ing channel automatically switches to Channel
New
(p. 63)
16. (p. 67)
Push