Icom IC-M91D Instruction Manual page 56

New2001
8
DSC OPERATION
D
Transmitting a Polling Reply call
Transmit a Polling Reply call when a Polling Request call is
received.
When the "POSITION ACK" in DSC Settings is set to 'Auto
TX' (p. 66), the transceiver automatically transmits a reply call
when receiving a Polling Request call.
Quick Reply:
q
When a Polling Request call is received, beeps sound and
the screen as shown below is displayed.
Push [ALARM OFF] to stop the beeps.
w
Push [ACK].
49
• Push [INFO] to display the Polling Request call information.
Push [BACK] to return to the previous screen, or push [ACK].
e
The Polling Reply confi rmation screen is displayed.
Push [CALL] to transmit the reply call.
r
While transmitting the reply call, the screen shown below
is displayed, and then returns to the normal operating
mode.
New