Dsc Operation; Dsc Address Id - Icom IC-M91D Instruction Manual

■

DSC address ID

D
Programming Individual ID
A total of 100 DSC address IDs can be programmed and as-
signed a name of up to 10 characters.
q
Enter "INDIVIDUAL ID" in the DSC SETTINGS menu.
➪
❮MENU❯ ❮DSC Settings ❯
(Push [MENU]) (Push [Y]/[Z], then push [ENTER].)
w
Push [ADD].
• The "INDIVIDUAL ID" program screen is displayed.
e
Enter a desired individual ID in the following way:
• Select a desired number using [Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENTER].
The fi rst digit is specifi ed as '0' for a Group ID.
The fi rst two digits are '0' for any Coast station ID.
r e to enter all 9 digits.
Repeat step
➪
❮Individual ID❯

DSC OPERATION

t
After entering the 9 digit code, push [ENTER] to set it.
• The ID name programming screen is displayed.
y
Enter a desired 10 digit ID name in the following way:
• Select a desired character using [∫]/[√]/[Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENTER].
• Push [123] then [!$?] then [ABC] to select a character group.
u
After entering the ID name, push [
"FINISH," then push [ENTER] to program it.
• The "INDIVIDUAL ID" list screen is displayed.
i
Push [MENU] to exit the MENU screen.
8
1
2
3
4
5
6
7
8
9
10
11
∫]/[√]/[Ω]/[≈] to select
12
13
14
15
16
20