Setting Favorite (Tag) Channels; Starting A Scan; Scan Operation - Icom IC-M91D Instruction Manual

■
Setting Favorite channels
For more effi cient scanning, add the desired channels as Fa-
vorite channels, or clear " for unwanted channels.
"
Channels that are not tagged will be skipped while scanning.
Favorite channels can be independently assigned to each
channel group (U.S.A., International and Canada*).
* For only the U.S.A. and EXP transceiver versions.
q
Select the desired channel group. (p. 12)
w Select the desired channel to be set as a Favorite channel.
e
] to set the displayed channel as a Favorite channel.
Push [
"
• " appears on the display.
r
To cancel the Favorite channel setting, repeat step
"
• " disappears.
✓
Clearing (or setting) all tagged channels
Hold down [] for 3 seconds (until a long beep changes to
2 short beeps) to clear all Favorite channel settings in the
selected channel group.
• Repeat above procedure to set all channels as Favorite channels.
[Example]: Starting a Normal scan.
■

Starting a scan

First, set the scan type (Priority or Normal
tion and scan resume timer in the Menu screen. (pp. 84, 85)
q
Select the desired channel group. (p.
w
Set the Favorite channels, as described to the left.
e
Make sure the squelch is closed to start a scan.
r
Push [SCAN] to start a Priority or Normal scan.
• "SCAN 16" appears during a Priority scan; "SCAN" appears
during a Normal scan.
• When a signal is detected, the scan pauses until the signal
disappears, or resumes after pausing 5 seconds, depending
e.
on the setting. (Channel 16 is still monitored during a Priority
scan.)
• Push [Y]/[Z] check the scanning Favorite channels, change
the scanning direction or manually resume the scan.
• A beep tone sounds and "16" blinks when a signal is received
on Channel 16 during a Priority scan.
t
To stop the scan, push [CLEAR] or repeat step
Scan starts.
Push
[SCAN]

SCAN OPERATION

scan), WX Alert func-
12)
r.
When a signal is received.
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18