Icom IC-M91D Instruction Manual page 84

9
OTHER FUNCTIONS
■
Waypoint (Continued)
Editing the waypoint: Push [EDIT]
The stored waypoint name and its position data can be
changed.
q
Push [EDIT] to enter the name programming screen.
• The preprogrammed name is displayed.
• If desired, enter a 10 digit name as described in the step w of
the previous page.
w Edit specifi c latitude and longitude data in the following way:
• The preprogrammed position data appears on each screen.
• Select a desired number using [Y]/[Z]/[Ω]/[≈].
• Push [ENTER] to set the digit.
• Select N (North latitude) or S (South latitude) when the cursor
is on the 'N' or 'S' position.
• Select W (West longitude) or E (East longitude) when the cur-
sor is on the 'W' or 'E' position.
• To move the cursor, select either arrow, "←" or "→," then push
[ENTER].
• To set the screen data, select "FINISH," then push [ENTER].
77
e
After the confi rmation screen appears, push [OK] to save
the waypoint and return to the waypoint list screen.
Deleting the waypoint: Push [DEL]
The stored waypoint can be deleted.
Please note that a deleted waypoint cannot be restored.
q
Push [DEL] to delete the waypoint.
• The confi rmation screen "ARE YOU SURE?" appears.
w
Push [OK] to delete the waypoint and return to the way-
point list screen.