Rate Limiting - Comnet CWGE2FE24MODMS Installation And Operation Manual

Rate Limiting

You can set up every port's bandwidth rate here.
All the ports support packet ingress and egress rate control. For example, assume
port 1 is 10Mbps, users can set its effective egress rate as 2Mbps, ingress rate as
1Mbps. The switch performs the ingress rate by packet counter to meet the specified
rate
InRate: Enter the port effective ingress rate (The default value is "0")
OutRate: Enter the port effective egress rate (The default value is "0")
And then, select
Rate Limiting interface
to apply the settings
46