Connecting An Rgb Signal - Barco iCon H600 Owner's Manual

Image 4-19
4.5.3.5

Connecting an RGB signal

RGB data connection
The RGB input consists of 5 BNC
• 3 for the color signals R,G,B
• 2 for the sync signals H (horizontal sync), V (vertical sync)
RGBS : If the source disposes of a composite sync output i.e. one wire includes the horizontal and the vertical sync than the V BNC
must not be connected, resulting in 4 BNC being connected (V is free).
RG B : If the source disposes of a sync on Green output i.e. the Green color signal includes the horizontal and the vertical sync
s
than the H and V BNC's must not be connected, resulting in 3 BNC being connected (H and V are free).
RGBHV
RG B
s
RGBS
Table 4-3
How to use the BNC's in case of different RGB signals
The RGB 5 BNC input can also be used to connect a component video source : see Connecting a Component
video source.
How to connect an RGB signal
1. Connect the 5 or 4 BNC cables to the projector's RGB input
R5976821 BARCO ICON 15/03/2007
R
G
R G
R G
s
R G
BNC Connector
B
B
B
B
4. Installation
H V
H V
- -
-
S
27