Lamp Mode - Barco iCon H600 Owner's Manual

8. Advanced
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Runtimes
Image 8-44
5. Press ENTER
A textbox is displayed
Image 8-45
8.5.2

Lamp mode

Single mode
The projector will always switch to the lamp with the shortest runtime when the difference between the runtimes of lamp 1 and lamp
2 reaches 100 hours, switching from one lamp to another happens only at switching on of the projector and not during operation.
When the lamp fails or reaches its maximum runtime the projector switches automatically to the other lamp without interrupting the
projection
In case of a lamp failure a lamp error is logged and showed on the screen.
98 R5976821 BARCO ICON 15/03/2007